Let us share our blogs with you !

The vacuum system for molecular distillation should not be selected from the evaporator size or the lowest pressure shown on a pump datasheet. The required vacuum depends mainly on: Target-component

Molecular distillation is a good candidate when a feed contains high-boiling or heat-sensitive components that can be separated by differences in volatility under deep vacuum. But not every high-boiling material

If a molecular distillation system reaches deep vacuum when empty but the pressure rises after feeding starts, this does not automatically mean the vacuum pump is faulty. The most common

Yes, wiped film molecular distillation can process many high-viscosity materials—but the important question is how viscous the feed is at the actual operating temperature. Some materials are highly viscous at

The size of a molecular distillation system should not be selected from feed rate alone. The more important question is: “How much of the feed actually needs to evaporate under

When comparing molecular distillation systems, vacuum level is often one of the first specifications buyers notice. One supplier may state: Vacuum: ≤1 Pa Another: ≤0.1 Pa Another: ultimate vacuum ≤0.01